2. To use the eps foaming machine, the working pressure of compressed air must be greater than 0.6Mpa. All control valves rely on compressed air as power to achieve timely opening and closing. Especially the discharge port depends on the cylinder to lock the valve. If the pressure is not enough or decreases, the discharge port will be pushed open. Therefore, to ensure the normal operation of the foaming machine, the working pressure of compressed air must be guaranteed.
3. When the machine needs to enter the barrel for maintenance, it is necessary to cut off the main power and set up a special person to monitor it. After the maintenance is completed, strictly check the tools and parts left in the barrel, etc. Otherwise, the ventilation plate and rotating bracket at the bottom of the barrel will be damaged.
4. During the production process of the machine, strictly prevent foreign materials mixed in the EPS raw materials from being sent into the foaming barrel, which will damage the ventilation plate at the bottom of the barrel.
5. During the production process, the machine must always pay attention to the sensitive reliability of the electric contact pressure gauge. If problems are found, they must be repaired or replaced in time to ensure the normal and stable production of the machine.
6. When checking and maintaining the machine, remember to turn off the power to avoid personal accidents.
